Heavier means more steel and fire lining, giving you superior fire and burglary protection. At 585 lbs and 24 cubic feet (29 lbs per cubic feet), this safe boasts exceptional construction, honest fire rating, and superior value. For over 15 years, Rhino Metals, Inc. the maker of Bighorn and Rhino Safes, has consistently provided homeowners and businesses with the highest quality safes and customer service available, earning the reputation of being the “biggest bang for your buck”.

The Securam ECSL-601 electronic lock is simple to use and utilizes a proven UL certified swingbolt lock design, with greater security and reliability than typical key override solenoid locks. The single 9 volt battery (not included) is mounted within the keypad on the front of the safe and can be changed without having to open the door or unlock the safe. Your 6 digit PIN code is stored in EPROM memory within the safe door, shielded along with the internal lock by three layers of armor plating, and will remain in memory for years even if the battery or keypad is destroyed or removed. With the locks brains and memory protected inside the safe, the lock and keypad cannot be hotwired. Also, after several incorrect PINS have been entered, the lock will go into a timed lockout mode disabling all inputs to the keypad and delaying further tampering.

The lock is the foundation of any safe. The Bighorn is equipped with a high quality lock that has passed the Underwriter’s Laboratories (UL) certification and testing program. UL is the safe industry’s authority for security testing. UL certified locks must pass UL’s expert break-in testing and then production is monitored for continued compliance. A UL certified lock means better security and reliability for you and your family.

The heavily built, 26 rifle slot, Bighorn 6030ELX is full of security features. Both the electronic lock and the safe design have each earned Underwriter’s Laboratories (UL) certifications for security. The 585 lb. safe body is 3 mm thick steel. Ten 1.25” diameter door bolts (7 active and 3 dead) supported by anti-pry supports, secure the 4.75” thick door with a 1.5” thick door front. A smoothly operating rack and pinion drive system provides 1.75” of door bolt extension, almost 40% more than the typical gun safe. The extra thick door, anti-pry supports, and long door bolt extension combine for superior pry protection. The lock is protected by three layers of hardened armor plate along with an internal relocker for added protection, designed to deadbolt the entire system if the lock is attacked.

The Bighorn 6030ELX safe is made with external hinges, allowing you to open the door a full 180° providing greater access to the inside of your safe than internal hinge designs which generally only open to about 90°. Additionally, the external hinges help improve fire resistance because there are no gaps in the lining of the door (a common heat transfer point with internal hinge systems). Deadbolts on the hinge side of the door lock behind the door frame to secure the door even in the event the hinges were somehow cut or removed in a break in attempt.

This safe has a 70 minute at 1200° F fire rating. The body and door of the safe are lined with fire protective gypsum board and a heat activated door seal around the door frame, which swells when heated, sealing the gaps between the door and doorframe. Additional design features include the extra thick 4.75” door and external hinges.

Each safe is finished with a durable 2.5mm thick plush fabric for protecting your valuables from getting banged up. Easily adjustable shelving allows reconfiguring to meet changing shelf height needs. Accessories can also be easily added to customize the safe for more specific needs. The safe is predrilled for bolting down and for an electric dehumidifier installation (not included). Anchoring hardware for mounting to concrete floors included.

• Stylish and durable baked on powder coated black finish
• 5 spoke vault style handle in bright chrome
• Easy to remove shipping feet (no troublesome wood pallet)
• Predrilled for anchoring to the floor
• Predrilled for dehumidifier (3/8” opening)
• Heavy-Duty bolt down kit included